Cost of A9X arms...cost an 'arm' & a leg?!
Started by
_j.e.d._
, Mar 12 2012 03:00 PM
31 replies to this topic
#27
_1uzbt1_
_1uzbt1_
-
- Guests
Posted 04 April 2012 - 02:29 PM
Harrops RRP price on those is $341 inc GST a pair.
#28
_L32M20_
_L32M20_
-
- Guests
Posted 03 May 2012 - 08:39 AM
did someone say you could use uc steering arms instead? are thery much different? i need to sort out my car aswell. will not drive in a straight line very well,keeps wanting to dart left or right. fkn scary at speed.
#29
_SLEDGE_
_SLEDGE_
-
- Guests
Posted 03 May 2012 - 10:30 AM
did someone say you could use uc steering arms instead? are thery much different? i need to sort out my car aswell. will not drive in a straight line very well,keeps wanting to dart left or right. fkn scary at speed.
If you are using HQ type stub axles then you should use the harrop arms, otherwise you will encounter bumpsteer.. even with UC arms.
Mine was the same with my old front end! doing the proper research and building the new one right was then best thing I've done to my car. Safety/performance/ride etc etc improved 1000%
Have a good read of this thread, you'll get answers to all your questions:
http://www.gmh-toran...-lx-rts-uc-rts/
#31
_jayz383viva_
_jayz383viva_
-
- Guests
Posted 03 June 2012 - 10:57 PM
how did we go with the arms? yip i need some too... dont want to pay 600 though... my wife is going to penrith in august so mabe i should see if she can get some then? we kiwis buy a lot of harrop gear so you would think they would look after us being neibours???
#32
_jayz383viva_
_jayz383viva_
-
- Guests
Posted 04 June 2012 - 01:55 PM
harrop just emailed me back, (emailed them last night) $310aus + $75freight, about $500nz. roll on payday. still high but worth it i hear 
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
