The forum has good info on front brakes, but not rears. I'm planning a conversion to HQ pattern on the front, pretty sure I have Torana bolt pattern on the rears.
I've measured ~245mm, or 9.6 inches across the outside of the drum as shown below.
It's stock LH right? I want to keep the original master cylinder, and go to either HQ drum or a rear disc setup. Has anyone recently done this and have any tips?
DSC_1306.jpg 75.17K
0 downloads
DSC_1307.jpg 72.88K
0 downloads
With the drum removed
DSC_1311.jpg 80.04K
0 downloads
LH rear brake upgrade - Identify this drum brake type
Started by
Lima31
, Jul 14 2012 04:53 PM
LH HQ
3 replies to this topic
#1
Posted 14 July 2012 - 04:53 PM
#2
Posted 14 July 2012 - 07:23 PM
Thats plain old Torana alright
#3
Posted 14 July 2012 - 08:13 PM
Thanks, these guys are attached to a 9"; for least fuss to getting to HQ pattern, I think I'll follow this thread:
http://www.gmh-toran...ert-to-hq-stud/
Converting to disc appears to require welding and new handbrake installs, argh
http://www.gmh-toran...ert-to-hq-stud/
Converting to disc appears to require welding and new handbrake installs, argh
#4
Posted 14 July 2012 - 08:43 PM
What needs welding ?
And you need to play with handbrake cables to put Q drums on anyway
And you need to play with handbrake cables to put Q drums on anyway
Also tagged with one or more of these keywords: LH, HQ
Holden Tech →
Driveline →
Hydraulic clutch conversion, how long is weld on tab for pedal?Started by fuzzypumper , 24 Oct 2020 LH, weld tab, hydrailic clutch |
|
|
||
General →
General Discussion →
What suspension set up is this.Started by _Daryl34_ , 20 Jun 2019 LH, LX, UC, A9X |
|
|
||
Holden Tech →
Electrical →
Where does this part fit? SLR ClusterStarted by _Eagle75au_ , 22 Apr 2018 slr, slr cluster, lh |
|
|
||
General →
Business Discussion →
Zinc plating in SydneyStarted by Toran the Carbarian , 19 Apr 2018 LH, plating, Sydney |
|
|
||
Holden Tech →
Brakes, Wheels and Tyres →
Willwood Caliper SetupStarted by _HDT05_ , 03 Aug 2017 Willwood, Calipers, LH |
|
|
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users