Javascript Disabled Detected

You currently have javascript disabled. Several functions may not work. Please re-enable javascript to access full functionality.

Shuddering problem.

Started by _73LJWhiteSL_ , Jul 16 2006 09:54 PM

Prev

Please log in to reply

29 replies to this topic

#26 _73LJWhiteSL_

Guests

Posted 18 November 2006 - 10:43 AM

Is this a disassemble most of front suspension job Chopper?

hmm fun with bushes :fool:

Steve

Back to top

#27 Stedz_lc

Forum Fixture

Members
1,144 posts

Joined: 10-November 05

Posted 18 November 2006 - 12:47 PM

Id also check tie rod's and rack ends for movement can also lead to this problem
Understand wat u mean datto thanks for the pull up on that one cheers

Back to top

#28 _CHOPPER_

Guests

Posted 18 November 2006 - 02:34 PM

Is this a disassemble most of front suspension job Chopper?

hmm fun with bushes

Steve

Never done it on an LJ. Hopefully undo the nuts at both ends and it should slide out. A hammer may be required.

Back to top

#29 _73LJWhiteSL_

Guests

Posted 20 November 2006 - 11:16 PM

Chopper, i have the LC Workshop manaul here in front of me and i can't find the caster bar. I am not familiar with the names of all the front suspension componets, but is the think you are calling the caster bar also called the control rod?

The thing that is bolted to the lower control arm between the stub axel and the spring and goes back to the crossmember brace? You mean the bushes and tub through the crossmember brace need replacing?

Steve

Edited by 73LJWhiteSL, 20 November 2006 - 11:18 PM.

Back to top

#30 _CHOPPER_

Guests

Posted 21 November 2006 - 04:15 PM

That's the one. The biggest problem I found with them is the crush tube is missing. This can lead to excesive loads on the bar. Do that to an XR - XF Foulcan and they can break. I've replaced the broken ones, so I know it can happen.