76 replies to this topic

[yel327]

I’m not sure. It may be an R series. Not sure what the side plate is, might be for an oddball application on a 4x4 and the case has been used on a rebuild?

[yel327]

I looked further. I reckon the case if off a G series, probably G53. They had a shifting arrangement bolted onto the side. It has had its tail housing changed to suit a traditional car.

 

Maybe talk to CRS and see if they can tell you what they are like.

 

http://tcase.rsgear....les/2001_06.pdf

 

https://autoparts.be...ies/PA01487079/

[yel327]

Here is another option. Probably not what you want for a cruiser, more for a 350hp fun car. But it is straight from a Torana. You’ll never break it with a 308. Most likely an M21 box so 2.20:1 1st gear.
I can’t tell if it’s multi fit or not, but it’s drilled for both patterns up the top.

http://www.gumtree.c...&utm_source=sms

[kimbo]

I looked further. I reckon the case if off a G series, probably G53. They had a shifting arrangement bolted onto the side. It has had its tail housing changed to suit a traditional car.

 

Maybe talk to CRS and see if they can tell you what they are like.

 

http://tcase.rsgear....les/2001_06.pdf

 

https://autoparts.be...ies/PA01487079/

 

Yep ...I think you are onto something there.  The funny little molding threw me as I could fine nothing like it.

[yel327]

Saw this too. Not sure if priced well or expensive. If you did buy it make sure it comes with proof of who modified it as Engineer will need that most likely.

http://www.gumtree.c...&utm_source=sms

[rexy]

Geez 4K for a BW second hand is a bit rich.

 

The W series supra boxes are good for about 300lbft of torque. They are very nice to drive compared to any of the Aussie or US boxes and fit in the LH/LX tunnel. There are multiple shifter options and most I have seen come up through the original shifter hole.

[Shiney005]

I wouldn't mind that diff myself, but sounds expensive to me. Edit. Rexy beat me to it.

Edited by Shiney005, 15 August 2023 - 09:20 AM.

[yel327]

I thought it was a bit dear too but read what it has.

New rotors drilled to HQ.
New billet axles.
New seals and bearings.
Refurbed calipers.
New Tru track type LSD.
Handbrake cables to suit Torana.

All that on top of the housing mods and the labour to set it up.

[kimbo]

I thought it was a bit dear too but read what it has.

New rotors drilled to HQ.
New billet axles.
New seals and bearings.
Refurbed calipers.
New Tru track type LSD.
Handbrake cables to suit Torana.

All that on top of the housing mods and the labour to set it up.

 

Yes I have been watching this one.  I am keen at about 4K I think

[rexy]

For that sort of money I would be buying a F**D 9 inch.

[yel327]

Whatever you buy make sure you get full details of who built it (as in who did the welding) and what the brake components are.

[kimbo]

Whatever you buy make sure you get full details of who built it (as in who did the welding) and what the brake components are.

 

It was built by Final Drive who are pretty well regarded as experts here in WA.

[yel327]

I know this isn’t the way you are going, but if your car was an early LX it would have been a good package.

http://www.gumtree.c...&utm_source=sms

[kimbo]

I know this isn’t the way you are going, but if your car was an early LX it would have been a good package.

http://www.gumtree.c...&utm_source=sms

 

Thanks mate :-)   Yeah not quite right but appreciate you looking out for me :-)

[yel327]

I wasn’t! I was looking for a SBC for a mate, but that is no good for him as it is a manual that won’t fit in a HT Holden.

[kimbo]

I am toying about with fitting a T5 behind the 308.  I came across this on Market place.

 

https://www.facebook...62-449dbc786f07

 

Basically its out of a FG Falcon and is described as perfect working order.  I have been speaking to the owner on messenger.   Anyhow I know nothing about Fords.  Is this the type of box that folk use for Torana's?  I know that T5s out of a Holden V8 generally need to Mustang housing to fit.   Will this also need a similar housing?  Any comments greatly welcome :-)

[kimbo]

Actually ...the guy selling this is full of shit.  T5s weren't available in the FG.  Waiting for more info from him LOL

[Shiney005]

FG's used the Tremec TR6060. Same box as the C7 Corvette and Dodge Challenger. It can handle a heap of torque, but might be a bit big to fit into a Torana tunnel? I'm sure there will be a thread on it in here somewhere.

[Heath]

Plenty of T56's, T56 Magnums, and TR6060's in Toranas, but yes, they need a tunnel.

 

And who needs 6 gears in a Torana, anyway? A grunty V8 in a ~1,400kg car just needs four ratios for driving and an overdrive for highway use. 

Go with a TKX if you don't have much luck with second hand boxes. Certainly a 6cyl Falcon T5 was the go but I don't know if they're becoming less easy to find or anything...

[kimbo]

So finally managed to find a T5. Lucked out as it's a fully reconned box where the owner failed to pick it up or pay for it after 2 years. Comes with warranty that doesn't kick in until the car gets regoed. Paid $1500 including the short shifter Does anyone recognise the 97DA tag as to which model Ford it came out of?  20231004_171119.jpg   108.34K   5 downloads  20231004_124215.jpg   63.76K   5 downloads  20231004_124151.jpg   72.05K   5 downloads

Sent from my SM-G988B using Tapatalk

[kimbo]

Things are moving. Panel and paint completed!!! My granddaughter said Granddads Piranah is coming today LOL

Reassembly begins :-)  20240316_175928.jpg   70.53K   5 downloads  20240316_175910.jpg   95.56K   5 downloads  20240316_175836.jpg   106.99K   7 downloads  20240316_171650.jpg   122.02K   7 downloads  20240316_175846.jpg   80.97K   6 downloads

Sent from my SM-G988B using Tapatalk

[Ice]

Great colour combo 

[kimbo]

Great colour combo

Thanks mate. I laboured over the satin black but pretty happy with it so fae :-)

Sent from my SM-G988B using Tapatalk

[SmacT]

Torana/Pirana - it works! Ha ha. Looks great.

[Shiney005]

Thanks mate. I laboured over the satin black but pretty happy with it so fae :-)

Sent from my SM-G988B using Tapatalk

How percentage of flattener went into the paint?  It looks pretty well spot on.