rear beaver and rear rail's being re-placed & re-paired.
LX hatch progress pic's.
#1 _A9XOSS_
Posted 02 January 2010 - 09:14 PM
rear beaver and rear rail's being re-placed & re-paired.
#2
Posted 02 January 2010 - 09:24 PM
#3 _A9XOSS_
Posted 02 January 2010 - 09:42 PM
lot of people hanging out for more beaver pics
A9X point taken, beaver is a beaver after all.
#4 _A9XOSS_
Posted 09 January 2010 - 07:24 PM
good guard from three rusted guards.
PIC_0300.JPG 128.41K 77 downloads PIC_0303.JPG 147.44K 91 downloads
PIC_0315.JPG 147.69K 79 downloads PIC_0316.JPG 133.83K 79 downloads PIC_0352.JPG 134.2K 73 downloads
PIC_0356.JPG 130.2K 76 downloads PIC_0359.JPG 123.2K 76 downloads PIC_0364.JPG 160.7K 75 downloads PIC_0365.JPG 150.51K 55 downloads
now ready for sandblasting.
Edited by A9XOSS, 09 January 2010 - 07:31 PM.
#5 _A9XOSS_
Posted 04 February 2010 - 10:40 PM
cheers.
Attached Files
#6
Posted 05 February 2010 - 09:13 AM
#7 _lx5008_
Posted 05 February 2010 - 09:20 AM
more pics of repairs all done by Dale at heatherbrae.
cheers.
same person who done my SS
#8 _A9XOSS_
Posted 05 February 2010 - 07:54 PM
Hi Graham,
Thanks for the contacts and recommendations mate.
I know my car is in good hands, i may have it back next week .
Edited by A9XOSS, 05 February 2010 - 07:54 PM.
#9 _A9XOSS_
Posted 11 February 2010 - 09:49 PM
a while but very happy with the end result.
Attached Files
#10 _SSbloke_
Posted 12 February 2010 - 06:30 PM
#11 _A9XOSS_
Posted 13 February 2010 - 09:47 AM
seen a couple of hatches around maitland today yellow one with all the flares on it and a nice original looking white SS followed him from maitland to thornton both good looking cars
hi mate, nice hatch you have there i will keep an eye out for you.
pretty sure ive seen the yellow one has some type of
A9X number plate aa99xx i think, if same car was for sale on
ebay once before too. white one unfortunatly i have not seen.
pretty sure LX5008 would know these cars.
#12 _A9XOSS_
Posted 13 February 2010 - 09:17 PM
#13 _lx5008_
Posted 13 February 2010 - 09:29 PM
#14
Posted 13 February 2010 - 09:30 PM
#15 _SSbloke_
Posted 14 February 2010 - 10:08 AM
the white one i saw turn off at thornton looked a pretty original 5.0L SS nice staight car the more the better !!!!!yes i know the hatches. they are not hvtc members yet but im working on that. i saw your hatch the other day. its looking good. in the work shop was your hatch, lc 2 door and a hg monaro all getting done. its funny he is a ford man but all he seems to do is 2 door holdens lol.
#16 _A9XOSS_
Posted 22 February 2010 - 10:41 PM
I had to remove the inner rear panels first, giving plenty of room to tackle this job.
PIC_0441.JPG 104.48K 76 downloads
PIC_0545.JPG 133.66K 103 downloads
PIC_0551.JPG 124.37K 81 downloads
#17
Posted 24 February 2010 - 07:56 AM
Looks like no corners are being cut.
Who did your door trims?
#18 _A9XOSS_
Posted 24 February 2010 - 04:12 PM
Looking good will be nice to know that all traces of the big "C" have been removed.
Looks like no corners are being cut.
Who did your door trims?
fatslr, thanx mate. as for the door trims ployweld did them. but cools trims supplied the
material and fitted the carpet pockets.
note: as far i know now your best on getting all the material
from cools excellent bloke (steve), then get polyweld to do them,
but may take a few months but they do a good job.
#19
Posted 24 February 2010 - 04:17 PM
Some nice panel work and a rust free hatch, great stuff.
Mick.
#20 _A9XOSS_
Posted 25 February 2010 - 08:07 PM
#21 _A9XOSS_
Posted 16 March 2010 - 04:16 PM
done one to go. trial fitting rust free front apron (ex-classic oz wreck item).
PIC_0553.JPG 95.97K 58 downloads PIC_0566.JPG 155.16K 87 downloads PIC_0563.JPG 144.98K 62 downloads
Edited by A9XOSS, 16 March 2010 - 04:16 PM.
#22
Posted 16 March 2010 - 08:02 PM
#23 _keg006_
Posted 16 March 2010 - 09:29 PM
looking really nice. The repairs are really neat. Would you mind posting a close-up of the lower hatch corner rubber channels where they meet the side of the hatch? If that makes sense. Was that a rare spare panel. Im having trouble figuring out how the curve blends into the side of the hatch quater panel. Any help much appreciated. Looking forward to seeing the rest of the build
#24 _A9XOSS_
Posted 17 March 2010 - 04:02 PM
I'm dreading repairing the rust I have in my rear shock towers. You seemed to have done a beautiful job of it, along with some other great repairs. Hadn't seen anyone else actually do that repair before. Cheers
Heath, i didnt do the shock towers mate, bugger of a job to do too .
i only did the jobs stated, i will be doing the rest though.
#25 _A9XOSS_
Posted 17 March 2010 - 04:08 PM
keg006, i think i know what you are saying, i will get someHi mate,
looking really nice. The repairs are really neat. Would you mind posting a close-up of the lower hatch corner rubber channels where they meet the side of the hatch? If that makes sense. Was that a rare spare panel. Im having trouble figuring out how the curve blends into the side of the hatch quater panel. Any help much appreciated. Looking forward to seeing the rest of the build
asap for ya, there is two pics there but not real close. only
the channel was used from the R/S kit, the original triangle corner
bits were o.k.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users