TOY-202
#51
Posted 10 March 2011 - 06:14 PM
Nice work.
#52 _Bomber Watson_
Posted 10 March 2011 - 06:16 PM
Needs a buff but yeah, not to bad for an industrial painter hehehe.
Cheers.
#53 _AGGRO_
Posted 11 March 2011 - 10:55 AM
#54 _CraigA_
Posted 11 March 2011 - 11:33 AM
I like the colour Bomber. A well executed 4 door like this and Chris' car (OrangeLJ) always give great results.
Looks like it will be complete for Toranafest this year
#55 _Drag lc_
Posted 12 March 2011 - 07:18 AM
MAybe thats how "WE" could run your mota in????????????
#56 _Bomber Watson_
Posted 12 March 2011 - 08:19 AM
#57 _mick74lh_
Posted 12 March 2011 - 09:48 PM
#58 _Bomber Watson_
Posted 12 March 2011 - 10:10 PM
Worlds slowest build but i do just about everything myself so meh.
Cheers.
Edited by Bomber Watson, 12 March 2011 - 10:10 PM.
#59 _Drag lc_
Posted 21 April 2011 - 08:54 PM
#60 _Bomber Watson_
Posted 21 April 2011 - 09:01 PM
Im just way to slack to post them.
Cheers.
#61 _Bomber Watson_
Posted 17 September 2011 - 06:50 PM
#62
Posted 17 September 2011 - 09:11 PM
#63 _Bomber Watson_
Posted 18 September 2011 - 09:50 AM
Ne way, to pick up approximately where i left off, lets start with what everyone has been waiting for.
Rolled her outside to get some snaps
Then the car once again sat idle while i waited for my machinist to do some stuff to my flexplate, ordered my torque converter, Summit order, etc
And i did some wiring. I hate wiring. Made up a mount fot 2 2 5/8" guages where the head unit used to go, made a new switch holder as the console wont be going back in, mounted my transbrake switch, made a mount for my LM-2 and started hard wiring that in, general stuff you do whilst waiting on stuff to put the engine in.
#64 _Gunmetal LH_
Posted 18 September 2011 - 10:05 AM
I like the wiring behind the glovebox. Will you use it as a glovebox or just a fusebox?
#65 _Bomber Watson_
Posted 18 September 2011 - 10:24 AM
Cheers.
#66 _Bomber Watson_
Posted 18 September 2011 - 10:38 AM
Over three years after piecing this bit of crap together, finally
Cheers to Cruiza for randomly dropping around as it was going in and giving me a hand/driving me nuts.
Random
Next i threw the carbs and a few other bits on and worked out what i needed..
Another Summit order, lol
Got these nifty storage bins from Autobarn
Great when you have eleventy billion little fittings.
Three vac guages at $19 each and a holder at $9 and i have a new sync tool
New fuel line
Started with the plumbing work
Hmmmmm
Also started modding my old breather tank with the worlds most complex baffle system and AN fittings
And cut up a couple of fuel tanks to make one good one hehehe
Painted my door catches and scuff plates
Fitted the catches
Seeing them with the nice stainless bolts makes me want to do more....Stupid shiny stuff.
More to come once again the forums yelled at me for posting to many picks
Cheers.
#67 _Bomber Watson_
Posted 18 September 2011 - 10:51 AM
Did some more plumbing
Made a mount to fit my new trans cooler and plumbed it up
Random
Also attempted to weld up my breather tank
That far so good, but i must have warped one of the fittings as it wouldnt screw up. So i tried running a steel cap onto it to clean it up, went on alright then just bound up and wouldnt come off. I ended up putting a big frOck off spanner on it and leaning on it like all buggery, and the fitting broke off. Oh well.
Mangledness
Thats about all i really have picks of atm, i have modded and fitted up the strakkies and a few other bibs and bobs but nothing overly exciting.
Cheers.
#68 _LS1 Hatch_
Posted 18 September 2011 - 12:31 PM
.
(and looking good!....and I hate to think how much I've spent with Summit myself as well..lol)
#69 _Bomber Watson_
Posted 18 September 2011 - 12:43 PM
Cheers.
#70 _LS1 Hatch_
Posted 18 September 2011 - 12:59 PM
Oh, and...
Got these nifty storage bins from Autobarn
They have the same things over here too..
http://www.harborfreight.com/floor-bin-rack-with-47-bins-95736.html
And I was working on my hatch today too...but I was wearing shoes and standing on carpeting.
#71 _Bomber Watson_
Posted 18 September 2011 - 01:05 PM
Cheers.
#72
Posted 18 September 2011 - 01:07 PM
Just fusebox mate....I rarely wear gloves.
Cheers.
Besides it's hard to fit gloves whilst wearing lil white mittens "EH Bomber" We all know you don't need a glovebox as those fluffy hand warmers never leave your grubby paws Good to see you adhere to OH&S but mate where's yo bloody flip flops incase you tread on a metal splinter ???
#73 _LS1 Hatch_
Posted 18 September 2011 - 01:13 PM
Attached Files
#74 _Bomber Watson_
Posted 18 September 2011 - 01:18 PM
Jeff, purdy. You have way more flash high tech stuff than i do haha
Suppose you would need all that crap to get a dirty v8 to move
#75
Posted 18 September 2011 - 01:22 PM
Andrew, blew a plug.
Jeff, purdy. You have way more flash high tech stuff than i do haha
Suppose you would need all that crap to get a dirty v8 to move
Yeah Bomber he needs all that wiring to run his green neons underneath
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users